The Australian market for electronic atomization devices has matured significantly, shifting towards devices that offer not just convenience but verified engineering reliability. For retailers and end-users alike, navigating the choice between closed-pod systems and high-capacity disposables requires an understanding of the underlying technology. This guide provides an in-depth technical analysis of two market leaders: the RELX Infinity series and the IGET Bar (3500 puff variant). We analyze them based on thermal engineering, battery chemistry, and structural integrity to help you make an informed decision available at VPGAU, Australia’s premier wholesale platform.
1. Market Positioning and Core Architecture
While both brands serve the adult demographic seeking alternatives, their engineering philosophies differ fundamentally. RELX employs a “Closed System” methodology, prioritizing reusability of the battery component with replaceable modular units. Conversely, IGET focuses on “All-in-One” (AIO) integrated architecture, designed for extended single-cycle usage without maintenance.
2. Atomization Science: Ceramic vs. Mesh
The most critical differentiator between these two devices is the heating element technology. This determines the consistency of the aerosol and the efficiency of the capacity consumption.
RELX: The FEELM Ceramic Standard
RELX utilizes the proprietary FEELM ceramic coil technology. Unlike traditional cotton wicks, this system uses a porous ceramic block with a flat metal film heating element deposited on the surface.
Engineering Advantages of Ceramic:
- Thermal Stability: Ceramic distributes heat evenly, preventing “hot spots” that can degrade the structural integrity of the pre-filled capacity.
- Micropore Structure: The ceramic substrate creates a labyrinth structure that traps the capacity via capillary action, significantly reducing leakage risks.
- Aerosol Particle Size: This method produces a finer aerosol (vapor), resulting in what the brand terms “Super Smooth” performance. The draw resistance is typically tighter (1.0–1.2 kPa), mimicking a high-fidelity restriction.
IGET: Vertical Mesh Optimization
The IGET Bar utilizes a Vertical Mesh Coil constructed typically from Kanthal or Stainless Steel with a resistance of approximately 1.2 Ohms.
Engineering Advantages of Mesh:
- Surface Area: Mesh covers a significantly larger surface area compared to helical wire. This allows for rapid ramp-up times (milliseconds to vaporization).
- Intensity: The increased surface area vaporizes a larger volume of capacity per puff, delivering a robust and warm sensory experience immediately upon activation.
- Wicking Efficiency: Surrounded by high-grade organic cotton, the mesh coil ensures constant saturation, which is crucial for a device holding 12ml of capacity to prevent “dry hits” near the end of its lifecycle.
3. Battery Physics and Energy Density
Reliability in electronic atomizers is dictated by the power supply’s ability to maintain constant voltage output.
| Feature | RELX Infinity | IGET Bar 3500 |
|---|---|---|
| Battery Capacity | 380 mAh (Lithium Polymer) | 1500 mAh (Cobalt Lithium-ion) |
| Charging Protocol | USB-C Fast Charge (45 mins) | N/A (Single Cycle) |
| Voltage Output | Regulated Constant Output | Direct Voltage (3.7V nominal) |
| Lifespan Logic | Designed for 300+ recharge cycles | Calibrated to outlast capacity reservoir |
Technical Note: The IGET Bar’s 1500mAh battery is a Cobalt-based cell, chosen for its high energy density. This massive capacity is engineered to ensure the device does not run out of power before the 12ml reservoir is depleted. In contrast, RELX uses a smaller, lighter Li-Po battery optimized for portability, relying on the user’s ability to recharge via USB-C.
4. Structural Build and Ergonomics
Material selection impacts the durability and tactile experience of the device.
RELX Series
The Infinity body is crafted from Aluminum Alloy 6063, a material often used in aerospace applications for its strength-to-weight ratio. The finish is achieved through sandblasting and anodizing, providing a satin texture that is resistant to fingerprints. The device includes the “SmartPace” vibration motor, which provides haptic feedback if the user inhales 15 times within 15 minutes, a feature for monitoring usage.
IGET Bar
The IGET Bar features a composite chassis using high-grade PCTG (Polycyclohexylenedimethylene Terephthalate Glycol) and Stainless Steel, often finished with a soft-touch rubberized coating. This design serves two purposes: it provides grip and thermal insulation, ensuring the device remains comfortable to hold even during extended mesh coil activation. The mouthpiece is ergonomically shaped to facilitate the Mouth-to-Lung (MTL) draw style.
5. Option Selection and Sensory Profiles
While we cannot discuss specific sensory outputs in marketing terms, we can analyze the variety and chemical stability of the available options.
- RELX Options: RELX invests heavily in R&D to create options that remain stable when heated by ceramic. Their portfolio focuses on complex layers, often mixing cooling agents with aromatic notes. Because the pods are sealed in a factory environment, the oxidation of the capacity is minimal, preserving the integrity of the option.
- IGET Options: The IGET range is renowned for its “single-note” purity and intensity. The 12ml capacity allows for a broad spectrum of classic options. The mesh coil’s high temperature tends to amplify sweeter and colder notes, making them distinctively bold.
6. Regulatory Compliance and Safety (YMYL Context)
In the regulated Australian landscape, safety is paramount. Products sold via reputable platforms like VPGAU adhere to strict validation processes.
Authenticity Verification
Due to the popularity of brands like IGET and RELX, counterfeit units exist in the market. Genuine devices possess:
- Holographic Security Labels: Tamper-evident seals on the packaging.
- QR Code Verification: Scannable codes that link directly to the manufacturer’s database to confirm the batch number.
- Batch Coding: Printed serial numbers on the device or packaging for traceability.
VPGAU Guarantee: We source directly from authorized supply chains to ensuring every unit meets manufacturer specifications and safety standards (RoHS and CE compliance where applicable).
Battery Safety Protocols
Both devices contain Lithium-based energy storage. Compliance with international transport standards (UN 38.3) is required for importation.
- Short Circuit Protection: The chipset cuts power if a short is detected in the coil.
- Over-discharge Protection: Prevents the battery from draining to a volatile level.
- Overcharge Protection (RELX): Stops current flow once the battery reaches 4.2V.
7. User Guide: Maintenance and Troubleshooting
To ensure optimal performance and safety, users should follow these technical guidelines.
Storage and Handling
Temperature: Store devices between 15°C and 25°C. Excessive heat (leaving in a car in the Australian summer) can degrade the battery chemistry and reduce capacity viscosity, leading to leakage.
Altitude: Changes in pressure (e.g., air travel) can cause the capacity reservoir to expand. For RELX, remove the pod before flying. For IGET, keep it sealed or upright.
Proper Disposal (Environmental Responsibility)
Disposable vapes contain lithium-ion batteries and electronic circuitry. They must not be thrown in general household waste bins.
- Recycling: Please use designated e-waste recycling collection points available at many electronics retailers and council facilities across Australia.
- Hazards: Improper disposal can lead to landfill fires. Be a responsible vaper and recycle your empty IGET Bars and RELX devices.
8. Extensive FAQs
1. Which device offers a better cost-per-puff ratio?
From a purely economic standpoint, the IGET Bar 3500 offers a lower entry cost for a high volume of usage (approx. 3500 puffs). RELX requires an initial investment in the device, but the ongoing cost of pods can be higher per milliliter. However, RELX offers a more premium, permanent hardware experience.
2. Can I recharge the IGET Bar 3500?
No. The standard IGET Bar 3500 is designed as a non-rechargeable unit. Attempting to open the casing to recharge the battery is dangerous and can lead to thermal runaway or fire. If you require a rechargeable option, look for IGET models specifically labeled as rechargeable (e.g., Bar Plus) or choose the RELX Infinity.
3. Why does my RELX vibrate?
This is the SmartPace feature. It vibrates when you insert a pod to confirm connection, and it vibrates if you take 15 puffs within 15 minutes to help you monitor your usage frequency.
4. Is the capacity in IGET different from RELX?
Both use high-quality ingredients (Propylene Glycol, Vegetable Glycerin, and aromatic compounds). However, the formulation viscosity differs. RELX capacity is optimized for ceramic wicking (thinner), while IGET capacity is optimized for cotton/mesh saturation (slightly thicker to prevent leaks in a large reservoir).
5. How do I verify if my product from VPGAU is genuine?
Every product shipped by VPGAU retains its original factory packaging with security seals. You can scratch the security coating on the package to reveal a code, which can be entered on the official brand website to confirm authenticity.
Final Recommendation and Supply Chain
Choosing between RELX and IGET depends on your operational preferences. If you value a sleek, reusable device with subtle, smooth delivery and haptic technology, the RELX Infinity is the superior engineering choice. If you prioritize maximum capacity, immediate ease of use, and robust performance without the need for cables, the IGET Bar 3500 is the market leader for a reason.
Ready to Stock Up?
VPGAU is Australia’s largest online platform for authentic disposable vapes and closed-pod systems. We specialize in wholesale logistics, ensuring that whether you need a single unit or bulk inventory, you receive genuine products fast.
Fast Shipping Australia-Wide | Authenticity Guaranteed | Best Price Promise
About the Author
John Colin
John Colin is a dedicated expert in Australian operations with deep expertise in supply chain management and regional compliance. He provides actionable strategic guidance to retailers across Oceania, helping them optimize inventory and navigate the complexities of local import laws. Committed to transparency and professionalism, John ensures that all market analysis and operational advice are based on verified data and the latest compliance guidelines.
About VPGAU
At VPGAU, we are more than just an online store; we are your dedicated partners in the vaping journey. Rooted in the Australian market, our mission is simple: to provide Aussie vapers with a reliable, safe, and seamless platform to access the world’s best vaping products. From those making the switch to seasoned enthusiasts, we are here to support every step of your experience.
Authenticity Guaranteed: In a market where consistency matters, we refuse to cut corners. We understand that safety and performance are non-negotiable. That’s why VPGAU strictly partners with reputable manufacturers to offer a curated selection of genuine electronic cigarettes, popular disposable vapes (including IGET and other top-tier brands), and essential accessories. Every product on our shelf is verified for authenticity to ensure robust build quality and the exceptional option profile you deserve.
Premium Value, Honest Pricing: We believe that high-quality vaping shouldn’t come with a premium price tag. VPGAU is committed to “Affordability Without Compromise.” By optimizing our supply chain, we bring you competitive pricing on top-rated devices. We ensure you get the best value for your money, balancing cost-effectiveness with the highest safety standards.
Fast, Local Service: We know that when you order, you want it fast. With a customer-first approach tailored for Australia, we prioritize rapid dispatch and reliable shipping across the country. Our support team is always ready to assist, ensuring that your experience—from browsing to unboxing—is smooth and hassle-free. VPGAU — Quality Vapes, Delivered Down Under.